Deutsch English

Rear projection screen

Find here rear projection foil for a rear projection screen!

A rear projection screen is an interesting alternative to a typical screen, the beamer being installed behind the screen so the image is projected through it. This technique allows to create bigger images as the beamer can be positioned further away from the screen and the light cone can’t be interrupted by viewers. With an optimal position of the beamer the loss of light can be minimized and a considerably high gain factor of 2,0 can be reached. As a result the images are very rich in contrast and depth.

Therefore rear projection screens are suitable for big open air events. People standing on the sides of the screen with a vision angle of >160 degrees are able to see the image in the right brightness and colours.

Usually rear projection screens are only 0,32 mm thick to allow the light to pass through ideally.  They are in transparent grey so that the light finds enough receiving surface but it still can shine through. Being very light (350 g per sqm) they are easy to transport.

Please put the raw side to the direction where the audience is (front side) and the smooth side to the projector direction (rear side)!

More sub catagories:
Rear projector screen fabric 16:9
Rear projector screen fabric 4:3
Rear projector screen fabric 1:1
Rear projector screen fabric 21:9
Rear projector screen sold by the meter

Shopping cart

You do not have any products in your shopping cart yet.

Information

Mitglied im Händlerbund
Akzeptieren

Diese Website verwendet Cookies. Durch die Nutzung dieser Webseite erklären Sie sich damit einverstanden, dass Cookies gesetzt werden. Mehr erfahren

Parse Time: 0.380s